Skip to content

Sabine County, Texas

Oil wells and drilling locations near Hemphill

  • 4wells
  • 1drilling location in two years

Within 10 miles

Wells and drilling locations around Hemphill

Map of Hemphill, Texas: 4 wells and 1 recent drilling locations within 10 miles, inside a dashed circle.
  • Drilling locations1Permits issued in the last two years
  • Producing wells0On a lease reporting production now
  • Not producing2Shut in, inactive or no lease on record
  • Plugged2The state's wellbore record says plugged

The dashed circle is 10 miles from the town's point (31.34074, -93.84685); the counts are for wells inside it. Sources: Railroad Commission of Texas well layers and permit files, US Census Bureau county outlines, town points from GeoNames (CC BY 4.0), base map from USGS The National Map.

See the whole Texas well map

Drilling permits near Hemphill are holding steady: 0 permits in the last 12 months, 1 in the 12 months before. The nearest is 6.1 miles north-west of the town's point. 4 wells and 1 drilling location permitted in the last two years lie within 10 miles of Hemphill, each where the state puts it.
Use this map on your site

You may show this map on any site, unchanged. Keep the credit line and its link to Royalty Clerk under the map. The picture updates by itself as the state records new wells and permits.

Download the picture (WebP)
<a href="https://royaltyclerk.com/texas/towns/hemphill-tx"><img src="https://royaltyclerk.com/maps/town-wells/hemphill-tx.svg" alt="Map of Hemphill, Texas: 4 wells and 1 recent drilling locations within 10 miles, inside a dashed circle." width="1000" height="1284" loading="lazy" style="max-width:100%;height:auto;border:0"></a>
<p style="margin:4px 0 0;font-size:14px">Map: <a href="https://royaltyclerk.com/texas/towns/hemphill-tx">Hemphill, Texas oil and gas wells</a> by Royalty Clerk, from Railroad Commission of Texas records</p>

Which way it is heading

Where the new drilling is around Hemphill

The 1 drilling permit of the last two years within 10 miles, by direction from the town's point, and what became of each one.
N NE E SE S SW W NW 1
Each wedge is the permits on that side of town. The centre is the town's point.

What became of the 1 permit

  • 1still only a permitNothing after the permit is on file. Many permits wait a year or more, and some are never drilled.

A horizontal well runs sideways underground. 1 well starts outside the 10-mile circle and ends inside it. So a well can drain land a mile or two from the spot where it shows on a map.

A permit is permission to drill, not a well, and a well nearby says nothing about who owns the minerals under it. Direction is taken from the well's surface location. Source: Railroad Commission of Texas drilling permits and wellbore records.

In numbers

Oil and gas within 10 miles of Hemphill

wells with a location on the state's map
4
drilling permits in the last 24 months
1
producing leases with a well in the circle
0
operators running them
0
oil and condensate those leases reported in their latest 12 months
0 bbl
gas those leases reported in their latest 12 months
0 mcf

A lease counts when at least one of its wells is inside the circle; its whole production is counted, so a lease reaching beyond the circle counts in full.

Drilling locations

The newest drilling permits near Hemphill

The 2 newest permits with a well location within 10 miles, with the coordinates of the surface location.
Newest drilling permits within 10 miles of Hemphill
IssuedLease and wellWhere
2025-11-07TEA OLIVE 1vertical · API 42-403-30487 · permit 0911638Adamas Energy LLC6.1 mi NW31.39981, -93.92321 on OpenStreetMap (opens in a new tab)
2023-10-03TEA OLIVE 1vertical · API 42-403-30487 · permit 0894240Aethon Energy Operating LLC6.1 mi NW31.39981, -93.92321 on OpenStreetMap (opens in a new tab)

A permit is permission to drill, not a well. Distances are from the town's point to the well's surface location. Source: Railroad Commission of Texas drilling permits.

Find your land

The surveys under the new drilling near Hemphill

Your deed or county tax notice names a survey and an abstract number. These are the ones with the most drilling permits in the last two years. Each has its own page with its wells and permits.
  • A-43 MOTT, J1 permit, newest November 7, 2025

Not in the list? Search every survey in the county by name or abstract number.

If your checks stopped

Leases near Hemphill that went quiet or changed hands

The two most common reasons a royalty check stops: the lease stopped reporting production, or a new company took it over and the paperwork is catching up.

1 lease reported nothing for a year or more

Leases that reported within the last four years and then stopped. The newest to stop first.

  • Ti-G · Pinnacle Operating Company, Inc.last report September 2022

Is my lease still active?

1 lease got a new operator in two years

Checks often pause after a change while the new company sets up its owner records. The newest first.

My royalty checks stopped: what to do

From the monthly production reports operators file with the Railroad Commission. The newest months fill in late, so a lease is listed only after 12 months with no report.

Year by year

Production of the leases near Hemphill, by year

Oil and gas reported by the leases with a well within 10 miles of Hemphill, by year
YearOil, bblGas, mcf
2026 so far00
202500
202400
202300
202200
202100
202000

Every lease with a well in the circle, producing now or not, as reported to the Railroad Commission. The newest months fill in as operators report.

The long view: in the state's records from January 1993 on, 4 of these leases reported 181,586 bbl of oil and condensate and 993,011 mcf of gas. Each lease page carries that lease's history back to January 1993.

Follow it

Watch the 10 miles around Hemphill

One email a week at most, and only when something is filed: a new drilling permit, a finished well, or first production with a well location inside this circle.

Watching a place says nothing about who owns the land or the minerals there. For the whole county, or one survey, use the Sabine County well watch.

FAQ

Questions people ask

How many oil and gas wells are near Hemphill?

4 wells with a location on the Railroad Commission's map lie within 10 miles of Hemphill: 0 on leases that are producing, 2 not producing and 2 plugged. The state also issued 1 drilling permit with a well location in that circle in the last 24 months.

What are the coordinates on this page?

Latitude and longitude of the well's surface location in NAD83, the coordinates map apps use. They come from the Railroad Commission's well layers as published, and from its drilling permit files, which are published in the older NAD27 and converted here. Paste them into any map app. A horizontal well's bottom hole can be a mile or two away from its surface location.

Do I own minerals under a well near Hemphill?

A well nearby says nothing about who owns the minerals under it. The county's mineral roll lists who is paid on each producing lease. Search a name to see whether the Sabine County roll lists it.

Search a name

Is drilling near Hemphill picking up or slowing down?

Drilling permits near Hemphill are holding steady: 0 permits in the last 12 months, 1 in the 12 months before. The nearest is 6.1 miles north-west of the town's point. A permit is permission to drill, not a well.

My checks from a lease here stopped. Why?

The usual reasons: the lease stopped producing, a new operator took it over, or the operator put the payments in suspense over a title or address question. Near Hemphill, 1 leases went quiet and 1 changed operator; both lists are on this page.

What to do when royalty checks stop

Own land or minerals near Hemphill?

See whether a county roll lists your name, and get an email when a permit or a new well is filed near you.